The Waveshare e-ink display he's using is $172.99.[0] The one that jgrahamc used in a sibling comment is about $200.[1]

It's a shame that it's not easier to pull the e-ink displays out of used e-readers because you can buy old Kindles on eBay for about $20-40. I know you can jailbreak them and achieve something similar to OP, but it'd be neat if you could just drop the vendor's e-reader firmware entirely and run your own software.

[0] https://www.waveshare.com/product/displays/e-paper/9.7inch-e...

[1] https://soldered.com/product/inkplate-10-9-7-e-paper-board-c...

I recently saw that my local supermarket had replaced most of the paper price tags with eink displays. I guess they can be updated dynamically from head office. Seems like you can buy them now on ebay for not much per unit.

https://tinyurl.com/28v4f583

I wonder what their battery life is, and which wireless protocol they use.

Fun. I used an e-ink display for something similar (just the weather forecast) and opted to use the onboard ESP-32. I try to stay away from Raspberry Pi for simple things because it's total overkill to have an entire operating system in there.

https://blog.jgc.org/2023/04/a-personal-weather-picture-usin...

This is one of those projects every nerd loves to build :D

My first iteration back in lockdown [0] focused mainly on rain (I'm from the UK), but later versions used a colour e-ink, added a camera to change the background with a selfie and added train times from my local station, along with upcoming birthdays. Reminds me I need to try and write an update at some point!

[0] https://jamesjarvis.io/posts/2020/06/umbrella-e-ink-weather-...

TRMNL community has published a lot of train/metro schedule recipe[1], that can be installed on any e-ink screen[2]

- [1] https://usetrmnl.com/recipes/

- [2] https://docs.usetrmnl.com/go/diy/byod

Disclosure: I work at TRMNL.

I recently got it. Device and firmware is a good value. I wish device would have better plastic quality but for something that hangs on the wall it doesn’t really matter.

It was very easy to make my own server with reactjs rendering for it. Now, adding new views is super easy and customizable.

Thanks for sharing, just made a pre-order, exited to have such a device, but as a young parent of two, I do not have the time to tinker such a costly project.

I built something like this. I am amused that mine too was built for my wife and also was one of the few techie things I've ever done that received unqualified spousal approval.

Mine shows weather and tide times at my wife's rowing club. It has the form-factor of a large fridge magnet. This led to the need to be battery powered and therefore very frugal with power - so a RPi wasn't feasible. It uses an ESP32. The data itself is collated by an AWS lambda.

This sounds very cool. Did you document it anywhere?

I'm wondering if it's possible to track ANY operational train, not just passenger trains. I'm a railway fan but I'm only interested in fright trains. I guess that piece of information is somewhere within the railway system but not public. And it's probably illegal to get a hold of such information.

Edit Found these: https://asm.transitdocs.com/map

https://railrat.net/ (probably just passenger trains)

a few of our users open sourced their own public transport (e-ink) plugins here, for major cities like NYC, Chicago, London, Zurich, etc: https://usetrmnl.com/recipes

I actually have a project like this, it's an alarm clock though. The idea was to not have something additional glowing at night and could pull my alarms from an online calendar. I've been procrastinating rewriting the code for an esp32 though since I think using my raspberry pi for an alarm clock is kind of a waste.

I have been using InkyPi for my own E-ink display. It recently got support for weather as well. I'm using a different display though, so your mileage may vary, but for me it works like a charm, would highly recommend. :)

https://github.com/fatihak/InkyPi

I used an Inky wHAT display with an old Raspberry Pi B+ to build a weather display that shows live weather pulled from my Ambient Weather station. My project uses Inky's python library. Since the Ambient API doesn't provide forecasts, I pull a daily forecast from the US Weather Service. And I grab the moon phase from Visual Crossing. https://github.com/skypanther/inkywhat

Love those projects! Did something quite similar a few years ago, found it quite useful and there's something just nice about eink displays for showing info that normal screens don't have

https://lengrand.fr/complete-setup-epaper/

I love an eink project as much as the next person but the trains look like they’re so frequent that if you’re really after “calm” maybe you could just forget about the train times completely, walk when you’re ready and know there will be one along in no time…?

This comes from someone in the middle of the country where there’s no train (nearest an hour drive away) and the buses are twice daily. So, yeh, I’m a little bitter :-)

They’re probably not that frequent at all times, and in any case no point standing around a train station for ten minutes.

My nearby buses and trains are normally something like one every ten minutes, but I check times before leaving the house (albeit not on an eink thing).

It's so frustrating to be walking into the train station, hear the train pulling in, rush to board and miss it by five seconds. Especially when you could have walked just a hair faster, or not stopped to look at that thing in the window for ten seconds.

At what point does one decides that a microcontroller doesn’t cut it and moves to a full OS system like rpi?

For example this could be an esp32 project

Probably at about the point you look at implementing a network stack on a microcontroller that isn't the ESP32.

Yes, this could have been a ESP32 project, because that has a network stack included, but it doesn't have an LVDS LCD interface, so you're going to have to implement one or the other on any 'simple' microcontroller.

I made a board similar to this that is based on an ESP32 eink screen (the Inkplate, which I highly recommend). The easiest way to render a dashboard like this is with a website, versus making the ESP32 render custom components and call a bunch of APIs). There isn't enough power on the ESP32 to render a website, but there is enough to fetch and render an image, but something has to generate that image. On mine, I use Home Assistant and pre-render a custom dashboard into a PNG, which the Inkplate grabs and renders. This guy skipped all that by just having the Pi do all the work in the first place, which is a fine way to do things if you can get the display working how you like.

Very nice product that Inkplate. Seems like it's a sweetspot where I can think about the content and not worry too much about the hardware aspect.

If you're producing in volume that's when the microcontroller and effort involved becomes worth the cost savings. For a static screen that just refreshes every 5 mins a tiny MCU can go a looong way. One could do this with 96k of RAM, the data is just text with a few sprites. As a bonus the whole device would consume a few mA on average.

30 degrees and she's dressed in a puffer jacket? Wut?

I'd assume Fahrenheit, which is around -1 degrees Celsius.

I was about to ask the same. 30° is a very uncanny number. Looks so much like summer temps in Europe